Cooking up a storm

The finished dish - ready for serving with a green salad.

Today I'd like to share one of my favourite pasta meals. Honeycomb cannelloni. This is a Jamie Oliver recipe from the 'Cook with Jamie' book. It's simple to make and although it does have a small amount of anchovies in, they can be left out to create a delicious vegetarian dish. This one is great for sharing. The recipe can be found here.

Beginning to assemble the dish - sauce, spinach and ragu.

Adding the canneloni - then top with remaining ragu and creamy sauce.

Fabric Manipulation - creative ideas with fabric.

I'd like to share with you some ideas for manipulating fabric. I have been fortunate to be involved in South East Northumberland Creative Futures project over the last 7 months or so. Yesterday was our last workshop, led by Claudia Van lieshout Smit. Non of the techniques we experimented with yesterday were completely new to me, but the combination of techniques was. I'd like to show you some of the experiments and explain how they were created. Some of these technquies could be developed into garment construction, art textiles or even fine art pieces and there are several ideas that I know I will develop further to meet my artistic intentions. * image heavy post*

All of the following techniques can be done at home with the minimum of equipment.

Materials needed:
Sewing machine and thread.
Iron
Baking paper/ parchment
Bondaweb
Heat gun
Acrylic paint
Organza - synthetic
Cotton fabrics
Offcuts of thread and fabric

Key Processes:
layering
cutting
ripping
stitching
bonding
melting

The first and simplest techniques was to make a fabric sandwich. Choose a plain background fabric and over half of it place fabric offcuts/ threads. you can be as deliberate or as randome as you wish.
Fold the fabric in half to enclose the bits and stitch around the edge. You then stitch across your fabric sandwich. I tried stitching a grid and some curved lines, but you could do some freestyle machine embroidery if you wish.

Then taking a sharp pair of scissors or stitch ripper, cut into the top layer - making sure not to cut the fabric below. The edges can be left raw; washed to make them fray or folded and stitched down.

I think I'll further embellish my designs with paint and some beading.

The second technique creates a "new" fabric that can be used in other techniques or embellished.
Start with a base fabric. I used some fine silk, but a medium cotton would have been better. Remove the paper backing from some Bondaweb and dot it over the fabric, ensuring the edges have good coverage. Then again layer off cuts of thread and fabric. you could be quite random here or create a very distinct pattern/ design. Over the top add another layer of bondaweb, this can be torn into small pieces. Make sure you remove the backing paper. Top with a layer of synthetic organza. Place beetween two sheets of baking parchment and iron without steam on a medium heat. The fabric should bond together creating something new that still has some flexibility.

You can also paint bondaweb. Use a water based paint, acrylic is perfect. It should be watered down. Once dry the bondaweb can be applied to a light coloured piece of fabric and the backing removed. This can then be stitched into or other fabrics added on top. just remeber to use Baking paper to stop it sticking to your iron.

The final technique we used was again a layering activity. Similar to the first one. Start with a plain backing, add scraps of fabric/ thread and cover with a layer of synthetic organza. Other synthetic fabrics could work too. Stitch all the layers together. This is a great opportunity to try some machine embroidery. Once stitched, gently apply heat using a heat gun. A hair dryer is not hot enough, and a wall paper stripper too strong. Craft heat tools are quite inexpensive and provide the right amount of heat. As the heat reacts with the synthetic fibres they contract and start to melt away, revealing the layer below.

I also tried just heating some organza, applying the heat carefully allowed me to control the distortion and create a textural piece of fabric.

I enjoyed this process and created several samples. One I particularly liked was sandwiching organza betweek two layers of cotton, which I slahed open and then heated to allow the organza to melt away, leaving a lacy delicate surface. More development needed I think. The white fabric looks a bit too stark, black might have been better.

Look out for more experiments!
What are your favourite techniques with fabric.

Developing your creativity

In this current age, creativity is prized as a key skill. Employers want employees to have it and be able to use it. However in the educational landscape of the UK at the moment the subjects that develop creativity and being sidelined and seen as less important. Schools are dropping performing and visual arts at a horrific rate.
 

Q: So what is creativity? 

A:      1) The ability to form new ideas and solutions to problems.

           2) To make original work.

Many people just don’t believe that they are creative. All are creative, but we may be creative in different ways. Some are creative in thought and some in making. Creativity, if it is going to flourish should be fostered and developed. There are ways we can boost our creativity and there are barriers to its development.

As an artist, I have faced many barriers to developing my creativity and I still don’t always get it right but I’m getting there. Let me share some of the things I need to watch out for and some of the things I find helpful in boosting my creative development.

1.     Self Doubt – This is the killer of creativity. That little voice that says you are just not good enough. I used to believe this, and then I decided to create things anyway, whether they were good or bad, what I found was that as I became more confident my work became better.

2.     Opinions of Others – This is a tricky one. As Humans we value what other people think and in certain circumstances we need our work validated by others, but this should not be the driver to what we do. Create it anyway and if someone likes it – great. If not just create for yourself.

3.     Taught linear thinking – It’s very easy to get into a linear process when making. Just working towards the final outcome. I know that when I have a very specific idea about what I want the final outcome to be – I always struggle with creating it. Instead – enjoy the journey.

4.     Time – As I work full time, finding time to create is always a challenge. However, I try to use my creativity in everything I do. It makes my job more creative and enjoyable too.

5.     Opportunity – Sometimes we miss opportunities to be creative because we are looking for a particular solution to a problem, rather than looking for alternatives.

6.     Rules – Sometimes they are there to be broken!

1.     Plan time – I will set time aside to work on my designing and creating. It’s not as much as I’d like, but it’s a start, and it does mean at some times I say no to the myriad of other things that need my time. Even if it’s only 15 minutes a day!

2.     Collect, pinch, appropriate – become a magpie, collect things that inspire you, poems, images, items, photographs, keep them! Either physically or virtually. I love Pinterest to help with this.

3.     Explore and experiment – Break those rules. Try something new. A new technique, media. A new theme? Get some training, go on courses and apply what you learn to what you already know.

4.     Collaborate and ask questions – Work with others, learn from others, share with others, join a group, collaborate – all the time ask, “What would happen if…?”

5.     Shower Moments – Keep a notebook. We all have those light bulb moments, usually when in the shower, driving, drifting off to sleep. Keep something to hand to scribble or record your thoughts at those moments.

6.     Don’t be precious – don’t be afraid to push your ideas, take it further. It’s when we push it that new ideas develop and we get out of our comfort zone. This requires courage and resilience as it’s in this place that we allow ourselves to “fail”, for things to go wrong – this can force us to look for new or alternative solutions rather than the safe ones.

Write, think, draw, paint, make, decorate, act, sing, make music, design, engineer, teach, learn. How do you create?