Burnsides - take two

A couple of years ago I made the Sew House Seven Burnside Bibs for the first time. I love the styling and the cut and the fact that they are just super cool and very easy to wear.  and you can read my post about them here. However, I found I had a couple of issues with the ones I had made.

The fabric was a stretch twill from Minerva. Quite utilitarian and I liked it. The stretch made these super comfy and very forgiving on fit. I made the slightly fitted waist version with the zip[ and had graded from a 6 at the waist to an 8 at the hip. perfect in the stretch fabric, butI found I wasn't 100% happy with the fit across my hips, it seemed to pull when first worn, but then did relax after a bit. Second issue - leg length. I'd hemmed these too short and I really did want full length versions! Everytime I wore the I always felt a tad uncomfortable! and finally I have a long body and always felt that the bib was a little bit low for my liking.

Said twill Burnside Bibs were donated to my friend who is a little shorter that me - she loves them!!!! I have just made version 2 and in the interests of recording my alterations I'm writing about it here.

First up - Fabric choice. This is John Kaldor Salso Linen Cotton from Minerva and I ordered 3m. This is one of the recommended fabric choices for this pattern and it's defo summer weight!

I slashed and spread the bib on the lengthen and shorten line and added about 5cm to the height. As I had already cut the pattern to a size 6 on top and an 8 from the hips I kept the top and the waist as they were and when my pattern pieces were placed on the fabric I used taillors chalk to draw in the size 10 line from the hips to the hem on the outside leg seams only - grading to the 6 at the waist. I also added 3 inches to the length.

I was very economical with my pattern cutting and had very little wastage. There was enough left to cut out a linen t shirt, which will get a lot of wear over the summer months. I love it when I get a bonus make out of my fabric.

I think that this version of this pattern is a much better fit and more me. It gives the impression of height and creates a long line - useful when you have short legs!

I followed the instructions as the pattern does have a few interesting construction notes, which I wanted to make sure I got right!

I love the flowy feel, but I'll need a but warmer weather before I wear them, rather than the snow we've had this week!!!

 

I also fancy making a shorts version to wear when skating in the summer - need to raid my fabric stash!!!!!!

Review: The Assembly Line Apron Dress

 

*** I had this post ready as a draft, weeks ago. I've only just managed to get my backside in gear and get some photos taken, so it's a little late ***

I first became aware of The Assembly Line patterns when I was on holiday on the south coast a few years ago. Their patterns weren't widely available in the UK then. I bought a single sized copy of the Hoodie Dress from a little shop not far from Lyme Regis (I can't remember the name of the store), they stocked some lovely sustainably sourced fabrics and a few of the TAL patterns. I very nearly bought the Apron dress then, but I didn't and it made it's way on to my ' want to make' list.

My mum bought me the pattern for Christmas and as I had also recieved some gift vouchers for Minerva, I splashed out on some nice weight indigo denim with a touch of stretch. I bought some top-stitching thread locally from The Sewing Machine Guy. It was lockdown, so I called by phone ordered what I needed and Ian, who owns the shop, very kindly dropped the supplies through my door on his way home - now that is customer service.

Anyway, on with the pattern. After checking the measurements I decided to make a size small. My measurements put me at the top of a small, but having made both the Hoodie Dress and Hoodie Parka in the small size I was confident that it would fit fine. It's not a tight fitting garment anyway.

I cut all the pieces from the denim. I thought a double layer for the facing might be a bit too thick, but it was fine. I had a few snap fasteners in my stash and they were perfect for the fastening and wen't through the multiple layers of denim really well.

I did all the construction and topstitching on my Pfaff Select 3.2 and the multiple needle positions make getting even rows of top stitching very easy. It also managed all the layers of denim very well. It struggled on one area, but mainly beacuse of the difference in thickness. As soon as I used a small wedge of card behind the foot to make it even it was fine. Note to self - get a jean-a-ma-jig!

As with other TAL patterns I have used, the instructions are clear and well written and very easy to follow so this pattern is suitable for beginners as there is nothing tricky about it.

The dress came together quickly and and sewed it up mostly in one afternoon. In retrospect I would have chosen a stable fabric as the waistband did stretch out a little at the back while I was top stitching.

I love the shape, length and style-lines of this garment. It is easy to wear and comfortable. I think it will be multi-season too. worn with tights and boots in the the autum and winter and with a much lighter blouse or vest top in warmer weather.

I do have a few issues with this pattern though. Nothing that couldn't be solved very easily.

It's the inside finish that I don't like. It's fairly neat and tidy, but I think it could be better. Personally, I would fully line the bib section and enclose the straps between the lining/ facing and shell. This would give a much much neater finish and would not be difficult to achieve.

Despite this, I actually love this pinafore. just like many of the TAL patterns it's simple, but with contemprary design lines that will become classic pieces. I can see me wearing this for a long time to come!

Zero Waste Patterns - are they worth it?

 

*** Photo heavy post***

I've been trying out a couple of 'zero waste' patterns recently. I'm a great fan of reducing waste. We've been actively trying to reduce our plastic consumption at home and reduce the amount of waste we create. It's been much harder during Covid times as our options have been somewhat limited.

We've almost got the bathroom sorted and since we started to make our own soap the amount of plastics and waste in the bathroom is minimal. We compost a lot of our food waste, which in turn helps us grow food - all good.

But what to do with those fabric scraps? I have always been pained to throw things away, which has meant an ever growing pile of small scraps of fabric. - that are really not much use!

I know that I can use this to stuff toys or the Closet Core patterns pouffe, or piece them together to make a Zero Waste Daniel style garment. (not managed this sucessfully as the pieces don't seem to go together) I've even made a quilt and have pieces cut for the next one, but this only really uses up my cotton scraps. I have even pieced fabric to enable me to cut out a garment from other waste materials - This I have had some success with and you can see the results here, here and here. I recently took part in the ZWDO community call and it was interesting to hear different designers take on creating zero waste designs.

However, the idea of setting out from the getgo to have not waste in my sewing really did appeal and when I saw the Zero Waste Hoodie on Zero Waste Wardrobe I knew I'd need to give it a go.

 

I had ordered some beautiful fleece backed sweatshirt fabric from Minerva and this warm snuggly fabric arrived a few weeks ago. I pre washed it and got ready to get started.

 

I checked the body measurements to see if the pattern would fit me and the width of the hoodie corresponded almost exactly with the very well worn one I've been wearing so I decided to go for it.

The pattern calls for 80cm of 180cm wide fabric. I don't think I've ever found fabric that wide for dressmaking and mine was 155 cm wide, so I had to adjust the layout to fit all the pieces on. 

I cut it all out and had enough left over for the t shirt from the same designer. I checked the shoulder width here and added a couple of cm's as I have wide shoulders and got it cut out. I was left with a rectangle of fabric measuring about 45cm wide and 60cm long - not bad.

I loved the design lines of the Hoodie. the construction of the pockets and the body is very well planned. The sleeve are raglan and quite narrow. At first try on I thought they were too narrow, but actually they're fine, but you can't really wear this as a second layer over a long sleeve top. Over a t-shirt is fine.

 

Once I had constructed the body and sleeves I tried it on and this is where things started going wrong! The shape at the shoulders was just wrong and unless you have a triangular body it's just not right. The neckline was very high and the fabric gaped horrifically. I decided that I would make the hood part and see how adding it on would affect the fit.

The hood is an interesting construction and uses pleats to shape the back of the hood. The hood edge has an eyelet for a cord to go through. I had issues with this as my eyelets would just not go in right. I've done eyelets lots of times and never had them end up bent and out of shape before - yes I did use interfacing. I had to cut a strip away from the edge to get rid of them! This left me with a much narrower hood band and not enough room to add a buttonhole. The hood then gaped and really did need the cord to give it some shape.

 

Anyway I basted it to the body of the sweatshirt and had a look. It was just not going to work. once the hood had been removed I set about rescuing this top, to make it wearable.

I took a large wedge out of the shoulder seams to make it lie as near as correctly as I could across the shoulders and then lowered and reshaped the neckline. 

From the remaining fabric I cut two hem bands for the sleeves and a band for the neckline. I think It could have done with being a tiny bit tighter as it stands a bit too proud, but I'm not changing it.

The T-shirt sewed up ok. The sleeves are a slightly odd construction, but they work. I also added a neck band to this garment. However I don't think I'd sew it again. The uses of some of the odd shaped pieces of fabric are rather clumsy and would benefit from more thought.

I had very high hopes for these garments and was left frustrated and disappointed that the hoodie was so far off the mark. The idea is great, but the drafting needs some work to make this usable. I was left with rather a lot of waste due to the issues with it. The T shirt is actually quite comfortable to wear.

It's a good few weeks since I finished these and I actually have found myself reaching for the sweatshirt quite a bit. It does have narrow sleeves so I think it will get more wear over the summer worn over verst tops and short sleeves.

For comparison I have just cut out the burnside bibs and a t-shirt based on a lengthened top from the TAL Hoodie dress from a piece of fabric and have less waste fabric left over than was left after this hoodie project. In the future I think I'll just be super economical with my pattern placement and continue piecing fabric to ensure I can cut out all the pieces with very little waste.

What's your thoughts on this? do you have a loved Zero Waste pattern or do you reduce your fabric waste in another way?

Get Yer Skates On

I don't know if you have noticed, but there has been a resurgence in roller skating over the last couple of years and due to the pandemic a shortage of stock (just like sewing machines).

You might call me mad or say I'm going through a midlife crisis - which may of course be true. However, I'm not the only one. I've recently realised that there are many people of a similar age to me, the world over, who are returning to, or starting skating for the very first time.

Instead of a midlife crisis, let's call it a midlife revival.

This was pretty much the skate set up I had as a teenager when I used to skate. I skated everywhere - to school and back; at the local lesiure centre for a roller disco; distance skating; street hockey; I even did some promotional work at parades and festivals. I even used my skates on stage as part of a dance routine with my dance class. But all that was 30 years ago and I haven't really skated since.

Fast forward to 2020 and I decided I'd give it another go. My daughter had a pair of very rarely used quad skates and I decided to head to the basketball court next to the local skatepark as it's fairly smooth. My son came with me as moral support. It was awful. I realised quickly that I had very little leg strength and while my brain had remembered how to do things, my body just didn't seem to be able to do them. Some of that was the skates - they were very solid and had little flex or movement in them. The slight change in pressure that usually results in a turn/ curve didn't happen in these and for the most part I thought it was me. My legs felt like jelly and I knew I'd need to get stronger to do this again. I didn't go out on her skates again - she annouynced that she wanted to use them, so that was the end of that.

But I'd started following some skaters on instagram and it had inspired me to have another go. I knew I'd need some new skates of my own and after trying my daughters I knew that going for just an entry level skate was a bad idea. As I hoped that I'd get better quickly and need something with more flexibility.

 

These are available from Double Threat Skates

I started to trawl the online skate sites and look at what was available. I started by looking at the Moxi skates. These are all fairly expensive apart from their entry level skate which has a cool rainbow on, comes in pink, black or yellow and costs £100. These are called Rainbow riders.

Chaya Melrose Elite - Still out of stock hopefully in soon at Slick Willies

 

However the more I looked into it, the more I thought I might have issues as lots of people said the boot was quite stiff and narrow and I have super wide feet!!! I started to look at other brands including the Rookie Artistic which come in black or white, Impala skates - lots of pretty colours but similar set up. They I came across Chaya skates. Intially I was taken with the Melrose style, which came in three levels. the basic skate (£89), the melrose deluxe (which came in a stunning royal blue! £109) and the Melrose Elite which had three colourways including a cool rainbow design (£144). I poured over the specifications and particularly the plate, truck and wheel set ups as I knew this would give me the flexibility to upgrade as I got better. I decided that the Elites would be the best option for me - but they were out of stock everywhere! I was still concerned about the width of these too. 

 

Chaya Jump 2 - from SkatePro

I started looking at Chaya's other skates and found the Jump 2 - which is a park skate, but has a similar truck/ plate/ wheel set up to the Elites. these have a more trainer style boot with a high top, but only come in one colour. These were in stock and £139. My hubby bought me them for Mother's day.

 

When I used to skate, I was pretty fearless. I rarely wore pads and my Bauer Turbo skates were actually 3 sizes too big and I used to slip them on and off quickly. However I loved those skates and knew that I wanted a similar plate, truck and wheel set up, which I feel I have in the Chaya skates. As I am much much older and maybe a little wiser, investing in some pads is important as I don't really want to be breaking any bones. I have wrist guards and knee pads. I ordered a small helmet, but it's still a little too big, so I beed to get some sizing liners to make it snug, I'll certainly need these if I plan to do any park skating. I was surprised how quickly some of the basics came back to me - still rather wobbly though.

Check out my video on Instagram

I have been very taken with the jam skating moves I've seen on insta and I'm hoping to learn how to do some of these cool moves. During the super windy and rather wintry weather earlier this week I decided to skate inside and practised some of these moves. I spent about an hour, even though my video clip is just a couple of minutes long. I've also found a couple of fairly local skate groups and there a couple of folks who are keen in my little town, so I'm hoping we can get together to skate a bit too.

 

 

My hubby has bought some cool laces for me and I'm going to make a skate leash to carry my skates to the skatepark -It's too rough on the pavement near my house. I can't wait until the roller discos can start again.

Have you every taken up or returned to a sport later in life? How did you find it? What did you enjoy and what scared you the most about it?